Datasheets, Manuals, and Prices for the Avtech AVO-9B2-B Laser Diode Driver (Pulsed Voltage)

Avtech AVO-9B2-B Laser Diode Driver (Pulsed Voltage)

Jump to: Datasheet - Manuals - Prices - Valid Model Numbers - Applications

The AVO-9 series of pulsed laser diode drivers are ideal for use with ultra-fast laser diodes from Lumics, Qphotonics, Fitel, Fujitsu, Mitsubishi, Bookham, Ulm Photonics, Nichia, and others. Each AVO-9 pulsed laser diode driver includes a customized high-speed socket for the user's diode, offering ease of use without noticeably degrading performance! The AVO-9B2 series operates to 400 mA, for pulse widths of 0.6 to 1000 ns, at repetition rates to 100 kHz. The rise and fall times are less than 350 ps. The AVO-9 series is often adapted to meet special requirements. Contact the factory (info@avtechpulse.com) with your requirements!

The most recent information for the AVO-9B2-B Laser Diode Driver (Pulsed Voltage) is available here:

AVO-9B2-B data sheet (PDF format, 649 kB).

A LabView driver for the "-B" version of this instrument is available!

The following manuals for the AVO-9B2 family (possibly including customized models) are available online:
Programming Manual for -B Instruments (826 kB)

Request our latest printed short-form catalog and our newsletter!

Prices - USA and Canada

Description P/N Price Notes

Laser Diode Driver (Pulsed Voltage) AVO-9B2-B
$13895
Base model. Units with the -B suffix include the IEEE-488.2 GPIB and RS-232 computer control feature.

Internet control (Telnet and Web) -TNT $676 Option. Adds a rear-panel Ethernet connector, providing Telnet or Web-based remote control from a network.

Recommended accessory kit (attenuators and terminators) -AK1 $531 Option. Consists of three SMA, 18 GHz, 2 Watt attenuators (10, 20 & 30 dB) for use on the output, and two 50 Ohm, 1 GHz, 1 Watt feed-through terminators (one SMA, one BNC) for use on external trigger inputs. Attenuators not for use at amplitudes above 50V.

Photodiode monitor -MD $233 Option.

Socket for 3-pin 9mm TO-18 package (generic). -P0 $0 Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.

Socket for butterfly package (generic). -P1 $708 Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.

Primary socket for butterfly package pins 8-14 (high-bandwidth drive pins), specific layout -P1B $708 Option. Specifies this common diode configuration (typical of Lumics diodes, and others): The socket will accept pins 8-14 of a standard butterfly package with 0.5 mm wide pins. A positive pulse will be applied to the diode anode (pin 10). Pins 8-9 and 11-13 will be grounded. Pin 14 will be made accessible through a solder terminal. (If the -T1B option is also ordered, pin 14 will be made accessible through a DB-9 connector instead, suitable for mating to a third-party temperature controller.) Four mounting holes on a 8.9 x 26 mm grid will be provided. The diode parasitic resistance (dV/dI at lasing) must be < 1 Ohm. No additional drawings are required if this option is specified. Typically ordered in combination with the -T1B option.

Primary socket for butterfly package pins 8-14 (high-bandwidth drive pins), specific layout -P1C $708 Option. Specifies this common diode configuration (typical of QPhotonics diodes, and others): The socket will accept pins 8-14 of a standard butterfly package with 0.5 mm wide pins. A negative pulse will be applied to the diode cathode (pin 12). Pins 8-11 and 13-14 will be grounded. Four mounting holes on a 8.9 x 26 mm grid will be provided. The laser input impedance (dV/dI at lasing) must be 25 Ohms (+/- 5 Ohms). No additional drawings are required if this option is specified. Typically ordered in combination with the -T1C option.

Socket for 3-pin 5.6mm package (generic). -P2 $130 Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.

Socket for 3-pin 5.6mm package, with typical Nichia pinout / resistance. -P2B $130 Option. Estimated price only. This specifies a pinout and series resistance compatible with the Nichia NDHV310APC and similar Nichia laser diodes. A socket is provided that will accept 3-pin 5.6 mm packages. Click on the hyperlink for a pinout drawing. The laser anode is on pin 1, and the laser cathode is on pin 3 and is common to the photodiode cathode and the case. Access to pin 2 (the photodiode anode) is not provided. No additional drawings are required if this option is specified. The laser input impedance (dV/dI at lasing) must be 20 Ohms (+/- 5 Ohms). Note that the maximum output current may be reduced by the high forward voltage drop typical of Nichia diodes (if > 3V).

Socket for 8-pin DIP package (generic). -P3 $708 Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.

Socket for 14-pin DIL package (generic). -P4 $1138 Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.

Socket for 14-pin DIL package, specific layout. -P4B $1138 Option. Provides a socket pinout suitable for use with certain Qphotonics DIL laser diodes (and others). The signal will be applied to pin 5, the laser anode. Pin 6 will be left open circuited. All other pins (1-4, 7-14) will normally be grounded. No access is provided to the thermal control pins, unless the -T4B option is ordered. The laser input impedance (dV/dI at lasing) must be between 0 and 5 Ohms.

Socket for 2-pin package with 2.5mm lead spacing and 0.5mm square pins -P5 $0 Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.

Rack Mount Kit -R5 $233 Option. For 17-inch-wide models only. Check datasheet for instrument dimensions. (All -B units are 17 inches).

Secondary slide-on socket for butterfly package pins 1-7 (low bandwidth thermal control pins) -T1B $789 Option. Adds a secondary (low-bandwidth) slide-on socket board for pins 1-7 of a butterfly package. A flexible cable connects the slide-on socket to the output module. A male DB-9 connector is provided on the output module, which provides access to the thermal control pins of the diode. DB-9 pin 2 connects to diode pin 2 (TH). DB-9 pin 3 connects to diode pin 5 (TH). DB-9 pin 4 connects to diode pin 1 (TEC+). DB-9 pin 5 connects to diode pin 14 (TEC-). The remaining DB-9 pins are unconnected. Pins 3, 4, 6, and 7 of the diode are grounded. Access to the photodiode, if present, is not provided. This option requires the -P1B option. This option is designed for compatibility with Thorlabs temperature controllers and Lumics laser diodes. It may be suitable for others as well.

Secondary slide-on socket for butterfly package pins 1-7 (low bandwidth thermal control pins) -T1C $789 Option. Adds a secondary (low-bandwidth) slide-on socket board for pins 1-7 of a butterfly package. A flexible cable connects the slide-on socket to the output module. A male DB-9 connector is provided on the output module, which provides access to the thermal control pins of the diode. DB-9 pin 2 connects to diode pin 1 (TH). DB-9 pin 3 connects to diode pin 2 (TH). DB-9 pin 4 connects to diode pin 6 (TEC+). DB-9 pin 5 connects to diode pin 7 (TEC-). The remaining DB-9 pins are unconnected. Pins 4 and 5 of the diode are grounded. Pin 3 is unconnected. Access to the photodiode, if present, is not provided. This option requires the -P1C option. This option is designed for compatibility with Thorlabs temperature controllers and certain QPhotonics laser diodes. It may be suitable for others as well.

Thermal control pin access for DIL package. -T4B $1363 Option. A male DB-9 connector is provided on the output module, which provides access to the thermal control pins of the DIL-package diode. DB-9 pin 2 connects to diode pin 11 (TH). DB-9 pin 3 connects to diode pin 12 (TH). DB-9 pin 4 connects to diode pin 1 (TEC+). DB-9 pin 5 connects to diode pin 14 (TEC-). The remaining DB-9 pins are unconnected. Pins 2-4 and 7-10 of the diode are grounded. Access to the photodiode, if present, is not provided. This option requires the -P4B option. This option is designed for compatibility with Thorlabs temperature controllers and Qphotonics laser diodes. It may be suitable for others as well.

Socket for TO-3 package (generic). -TO3 $708 Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.

Positive output polarity
-P
0
A polarity must be specified.

Negative output polarity
-N
0
A polarity must be specified.

These prices are in U.S. dollars, and apply only within the United States and Canada. A 5% academic discount is available for North American universities.

Click here for additional information about price list terms, shipping methods, warranty and repair information.

Description	P/N	Price	Notes
Laser Diode Driver (Pulsed Voltage)	AVO-9B2-B	$13895	Base model. Units with the -B suffix include the IEEE-488.2 GPIB and RS-232 computer control feature.
Internet control (Telnet and Web)	-TNT	$676	Option. Adds a rear-panel Ethernet connector, providing Telnet or Web-based remote control from a network.
Recommended accessory kit (attenuators and terminators)	-AK1	$531	Option. Consists of three SMA, 18 GHz, 2 Watt attenuators (10, 20 & 30 dB) for use on the output, and two 50 Ohm, 1 GHz, 1 Watt feed-through terminators (one SMA, one BNC) for use on external trigger inputs. Attenuators not for use at amplitudes above 50V.
Photodiode monitor	-MD	$233	Option.
Socket for 3-pin 9mm TO-18 package (generic).	-P0	$0	Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.
Socket for butterfly package (generic).	-P1	$708	Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.
Primary socket for butterfly package pins 8-14 (high-bandwidth drive pins), specific layout	-P1B	$708	Option. Specifies this common diode configuration (typical of Lumics diodes, and others): The socket will accept pins 8-14 of a standard butterfly package with 0.5 mm wide pins. A positive pulse will be applied to the diode anode (pin 10). Pins 8-9 and 11-13 will be grounded. Pin 14 will be made accessible through a solder terminal. (If the -T1B option is also ordered, pin 14 will be made accessible through a DB-9 connector instead, suitable for mating to a third-party temperature controller.) Four mounting holes on a 8.9 x 26 mm grid will be provided. The diode parasitic resistance (dV/dI at lasing) must be < 1 Ohm. No additional drawings are required if this option is specified. Typically ordered in combination with the -T1B option.
Primary socket for butterfly package pins 8-14 (high-bandwidth drive pins), specific layout	-P1C	$708	Option. Specifies this common diode configuration (typical of QPhotonics diodes, and others): The socket will accept pins 8-14 of a standard butterfly package with 0.5 mm wide pins. A negative pulse will be applied to the diode cathode (pin 12). Pins 8-11 and 13-14 will be grounded. Four mounting holes on a 8.9 x 26 mm grid will be provided. The laser input impedance (dV/dI at lasing) must be 25 Ohms (+/- 5 Ohms). No additional drawings are required if this option is specified. Typically ordered in combination with the -T1C option.
Socket for 3-pin 5.6mm package (generic).	-P2	$130	Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.
Socket for 3-pin 5.6mm package, with typical Nichia pinout / resistance.	-P2B	$130	Option. Estimated price only. This specifies a pinout and series resistance compatible with the Nichia NDHV310APC and similar Nichia laser diodes. A socket is provided that will accept 3-pin 5.6 mm packages. Click on the hyperlink for a pinout drawing. The laser anode is on pin 1, and the laser cathode is on pin 3 and is common to the photodiode cathode and the case. Access to pin 2 (the photodiode anode) is not provided. No additional drawings are required if this option is specified. The laser input impedance (dV/dI at lasing) must be 20 Ohms (+/- 5 Ohms). Note that the maximum output current may be reduced by the high forward voltage drop typical of Nichia diodes (if > 3V).
Socket for 8-pin DIP package (generic).	-P3	$708	Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.
Socket for 14-pin DIL package (generic).	-P4	$1138	Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.
Socket for 14-pin DIL package, specific layout.	-P4B	$1138	Option. Provides a socket pinout suitable for use with certain Qphotonics DIL laser diodes (and others). The signal will be applied to pin 5, the laser anode. Pin 6 will be left open circuited. All other pins (1-4, 7-14) will normally be grounded. No access is provided to the thermal control pins, unless the -T4B option is ordered. The laser input impedance (dV/dI at lasing) must be between 0 and 5 Ohms.
Socket for 2-pin package with 2.5mm lead spacing and 0.5mm square pins	-P5	$0	Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.
Rack Mount Kit	-R5	$233	Option. For 17-inch-wide models only. Check datasheet for instrument dimensions. (All -B units are 17 inches).
Secondary slide-on socket for butterfly package pins 1-7 (low bandwidth thermal control pins)	-T1B	$789	Option. Adds a secondary (low-bandwidth) slide-on socket board for pins 1-7 of a butterfly package. A flexible cable connects the slide-on socket to the output module. A male DB-9 connector is provided on the output module, which provides access to the thermal control pins of the diode. DB-9 pin 2 connects to diode pin 2 (TH). DB-9 pin 3 connects to diode pin 5 (TH). DB-9 pin 4 connects to diode pin 1 (TEC+). DB-9 pin 5 connects to diode pin 14 (TEC-). The remaining DB-9 pins are unconnected. Pins 3, 4, 6, and 7 of the diode are grounded. Access to the photodiode, if present, is not provided. This option requires the -P1B option. This option is designed for compatibility with Thorlabs temperature controllers and Lumics laser diodes. It may be suitable for others as well.
Secondary slide-on socket for butterfly package pins 1-7 (low bandwidth thermal control pins)	-T1C	$789	Option. Adds a secondary (low-bandwidth) slide-on socket board for pins 1-7 of a butterfly package. A flexible cable connects the slide-on socket to the output module. A male DB-9 connector is provided on the output module, which provides access to the thermal control pins of the diode. DB-9 pin 2 connects to diode pin 1 (TH). DB-9 pin 3 connects to diode pin 2 (TH). DB-9 pin 4 connects to diode pin 6 (TEC+). DB-9 pin 5 connects to diode pin 7 (TEC-). The remaining DB-9 pins are unconnected. Pins 4 and 5 of the diode are grounded. Pin 3 is unconnected. Access to the photodiode, if present, is not provided. This option requires the -P1C option. This option is designed for compatibility with Thorlabs temperature controllers and certain QPhotonics laser diodes. It may be suitable for others as well.
Thermal control pin access for DIL package.	-T4B	$1363	Option. A male DB-9 connector is provided on the output module, which provides access to the thermal control pins of the DIL-package diode. DB-9 pin 2 connects to diode pin 11 (TH). DB-9 pin 3 connects to diode pin 12 (TH). DB-9 pin 4 connects to diode pin 1 (TEC+). DB-9 pin 5 connects to diode pin 14 (TEC-). The remaining DB-9 pins are unconnected. Pins 2-4 and 7-10 of the diode are grounded. Access to the photodiode, if present, is not provided. This option requires the -P4B option. This option is designed for compatibility with Thorlabs temperature controllers and Qphotonics laser diodes. It may be suitable for others as well.
Socket for TO-3 package (generic).	-TO3	$708	Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information.
Positive output polarity	-P	0	A polarity must be specified.
Negative output polarity	-N	0	A polarity must be specified.

Prices - International

Customers in Austria, China, France, Germany, India, Japan, Korea, Switzerland, Taiwan and Turkey should contact their local representative for pricing. International prices will be somewhat higher than the USA/Canada pricing shown above, depending on local documentation requirements, customs and shipping procedures, and other regulatory issues (for example, the European WEEE directive).

Customers in other countries should contact our Canadian headquarters directly for pricing. Avtech can ship internationally by FedEx (preferred), UPS, DHL, or Bax Global.

Click here for additional information about price list terms, shipping methods, warranty and repair information.

To form a valid model number:

AVO-9B2-B
+ (select one polarity: -P, -N)
+ (select one: -P0, -P1, -P1B, -P1C, -P2, -P2B, -P3, -P4, -P4B, -P5, -TO3)
+ (possible options: -TNT, -AK1, -MD, -R5, -T1B, -T1C, -T4B)
Each model is customized for a specific diode's pinout and I-V characteristics. If a generic pinout option (e.g., -P0, -P1, -P2, -P3, -TO3) is selected, then a drawing showing the diode package size and electrical pinout must be provided by the end-user, and the model number and price may change. If a specific pinout option has been selected (-P1B or -P1C, for instance), no additional information is required.
Some options may not be available with all formats (see the table above), and some combinations of options may not be available together. See the data sheet for details.
Our online Model Number Checker tool can be used to validate model numbers.

Related Models

AVO-9A Laser Diode Driver (Pulsed Voltage)

AVO-9B Laser Diode Driver (Pulsed Voltage)

AVO-9B1 Laser Diode Driver (Pulsed Voltage)

AVO-9C Laser Diode Driver (Pulsed Voltage)

AVO-9E Laser Diode Driver (Pulsed Voltage)

AVO-9F1 Laser Diode Driver (Pulsed Voltage)

AVO-9F2 Laser Diode Driver (Pulsed Voltage)

AVO-9F3 Laser Diode Driver (Pulsed Voltage)

AVO-9G Laser Diode Driver (Pulsed Voltage)

AVO-9H Laser Diode Driver (Pulsed Voltage)

AVO-9H1 Laser Diode Driver (Pulsed Voltage)

AVO-9L Laser Diode Driver (Pulsed Voltage)

AVO-9M Laser Diode Driver (Pulsed Voltage)

AVO-9P Laser Diode Driver (Pulsed Voltage)

AVO-9W Laser Diode Driver (Pulsed Voltage)

Related Applications Information

AN-6 ~ Recommended Consultants and System Integrators

Typical Waveforms for the AV-1011-B with a Current-Boosting Transformer

AN-5 ~ Vendors of Fast Pulse Accessories

How to Deliver a Fast 2 Amp Pulse to a Diode in a Probing Station

AN-2A ~ General Applications Information

LabView drivers

Export Controls

Some or all of the models in the AVO-9B2 product family have rise times of 500 ps or less, and amplitudes of 6V or more. Due to government policy and international treaty obligations, these models are not available for sale to India, Pakistan, and other nations that are not signatories of the Nuclear Non-Proliferation Treaty. (US ECCN 3A230 / 3A44B, Canada Export Control List 4507.3)

Other Information

Avtech accepts major credit cards, for your convenience!

	Products Parametric Search App Notes Ordering Contact Literature

	AVO-9B2-B data sheet (PDF format, 649 kB).
	A LabView driver for the "-B" version of this instrument is available!
	The following manuals for the AVO-9B2 family (possibly including customized models) are available online: Programming Manual for -B Instruments (826 kB)
	Request our latest printed short-form catalog and our newsletter!