AVMP-3A models can deliver up to 20V into 50 Ohm loads, at pulse repetition frequencies (PRFs) up to 100 kHz, with pulse widths of 10 ns to 1 us. The rise and fall times (20%-80%) are 200 ps or less.
The most recent information for the AVMP-3A-B Ultra High Speed Pulse Generator is available here:
|AVMP-3A-B data sheet (PDF format, 273 kB, 2020-08-28).|
|A LabView driver for the "-B" version of this instrument is available!|
|The following manuals for the AVMP-3A family (possibly including customized models) are available online:
Prices - USA and Canada
|Ultra High Speed Pulse Generator||AVMP-3A-B
||Base model. Units with the -B suffix include the IEEE-488.2 GPIB and RS-232 computer control feature and a 2m/6ft GPIB cable.|
|Positive output polarity
||A polarity must be specified.|
|Negative output polarity
||A polarity must be specified.|
|Accessory kit (attenuators and terminators)||-AK1||$574||Option. Consists of three SMA, 18 GHz, 2 Watt attenuators (10, 20 & 30 dB) and two 50 Ohm, 1 GHz, 1 Watt feed-through terminators (one SMA, one BNC).|
|Accessory kit (adapters and short coaxial cables)||-AK8||$376||Option. Consists of one 12-inch SMA-M/SMA-M hand-formable coaxial cable with solderable jacket, one 12-inch SMA-M/SMA-M RG-316 coaxial cable, one 36-inch SMA-M/SMA-M RG-316 coaxial cable, one 24-inch SMA-M/BNC-M RG-316 coaxial cable, one 36-inch BNC-M/BNC-M RG58C/U coaxial cable, one SMA-F to BNC-M adapter, one SMA-M to BNC-F adapter, one SMA-F to SMA-F adapter, and one SMA-F to solder cup adapter.|
|Ethernet port, for remote control using VXI-11.3, ssh, telnet, and web||-VXI||$0||Option. Standard feature for orders after Jan 14, 2019 - it is no longer necessary to specify this option. Adds a rear-panel Ethernet connector, allowing the instrument to be remotely controlled using the VXI-11.3, ssh (secure shell), telnet, and http (web) protocols. In particular, the VXI-11.3 features allows software like LabView to control an instrument using standard VISA communications drivers and network cabling, instead of using old-style GPIB cabling. (This eliminates the need for a GPIB controller card and its proprietary drivers.).|
|DC Offset Options|
|Bias tee circuit for externally-generated DC offset||-OS||$2161||Option. For units with 1us maximum PW (AVMP-2A, AVMP-3A).|
|Bias tee circuit for internally or externally generated DC offset||-OT||$2485||Option. For units with 1us maximum PW (AVMP-2A, AVMP-3A).|
|Provide a Certificate of Conformance||-CC1||$106||Option.|
|Provide an installed IUID-format label||-ID1||$106||Option. Label only. Does not include data registration. Records the manufacturer CAGE code, the instrument serial number, and the model number.|
|Monitor output||-M||$539||Option. The monitor output provides an attenuated replica of the voltage on the main output, for largely non-invasive waveform measurements.|
|Rack Mount Kit||-R5||$322||Option. For 17-inch-wide models only. Check datasheet for instrument dimensions. (All -B units are 17 inches).|
|Extra GPIB cable, 1 meter||-X1||$53||Option.|
|Extra GPIB cable, 2 meters||-X2||$75||Option.|
|Extra GPIB cable, 4 meters||-X4||$97||Option.|
|AC Power Cords|
|Power cord for United Kingdom, Hong Kong, Singapore, Malaysia||-AC00||$0||Option. BS 1363, 230V, 50 Hz.|
|Power cord for Australia, New Zealand||-AC01||$0||Option. AS 3112:2000, 230-240V, 50 Hz.|
|Power cord for Continental Europe, Korea, Indonesia, Russia||-AC02||$0||Option. CEE 7/7 Schuko, 230V, 50 Hz.|
|Power cord for North America, Taiwan||-AC03||$0||Option. NEMA 5-15, 120V, 60 Hz.|
|Power cord for Switzerland||-AC06||$0||Option. SEV 1011, 230V, 50 Hz.|
|Power cord for South Africa, India||-AC17||$0||Option. SABS 164-1, 220-250V, 50 Hz.|
|Power cord for Japan||-AC18||$0||Option. JIS 8303, 100V, 50-60 Hz.|
|Power cord for Israel||-AC19||$0||Option. SI 32, 220V, 50 Hz.|
|Power cord for China||-AC22||$0||Option. GB 1002-1, 220V, 50 Hz.|
|ATA shipping case||-ATA3||$1398||Option. Ships the instrument in a heavy-duty ATA-style transport case, instead of the normal cardboard box. It can also serve as a storage case. This option is recommended for shipments outside of North America and Europe, and is mandatory when using a freight-forwarder or when shipping by any method other than FedEx/UPS. It is strongly recommended for all shipments to China. Pelican model 1690 for full-rack-width (17 inch / 430 mm) units, including all -B units. Pelican model 1610 for half-rack-width (8.5 inch / 215 mm) units. This option increases the shipping weight by 45 lbs / 20 kg (1690) or 24 lbs / 11 kg (1610).|
|Ship to USA or Canada, on Avtech FedEx Priority account||$0||Included in base price.|
|Ship globally, on customer FedEx or UPS account||$0||Excludes Austria, China, The Czech and Slovak Republics, Germany, India, Japan, Korea, Switzerland, Taiwan and Turkey. Consult your local representative for pricing.|
|Ship globally, on Avtech FedEx Priority account||Contact Avtech for pricing.||Excludes the above countries.|
|Ship globally, using a customer-specified freight forwarder||Contact Avtech for pricing.||Excludes the above countries. Not recommended. Due to the increased likelihood of shipping damage, the -ATA3 option (heavy-duty ATA shipping case) is mandatory for -PS, -C, and -B models.|
These prices are in U.S. dollars, and apply only to orders placed directly with Avtech from the United States and Canada. Reseller prices may be higher. A 5% academic discount is available for North American universities. Orders are non-cancellable, non-returnable.
Click here for additional information about price list terms, shipping methods, warranty and repair information.
Prices - International
Customers in Austria, China, The Czech and Slovak Republics, France, Germany, India, Japan, Korea, Switzerland, Taiwan and Turkey should contact their local representative for pricing. International prices will be somewhat higher than the USA/Canada pricing shown above, depending on local documentation requirements, customs and shipping procedures, and other regulatory issues (for example, the European WEEE directive).
Customers in other countries should contact our Canadian headquarters directly for pricing. Avtech can ship internationally by FedEx (preferred), UPS, DHL, or Bax Global.
To form a valid model number:AVMP-3A-B
+ (select one polarity: -P, -N, -PN)
+ (recommended optional accessory kits: -AK1, -AK8)
+ (select one power cord: -AC00, -AC01, -AC02, -AC03, -AC06, -AC17, -AC18, -AC19, -AC22)
+ (select one, or none, from: -OS, -OT)
+ (recommended shipping case, mandatory if not shipping by FedEx or UPS: -ATA3)
+ (other possible options: -VXI, -CC1, -ID1, -M, -R5, -X1, -X2, -X4)
Some options may not be available with all formats (see the table above), and some combinations of options may not be available together. See the data sheet for details.
Our online Model Number Checker tool can be used to validate model numbers.
Typical Test Results
No recent test results are currently available online. Contact Avtech for test data.
- AVMP-2 Ultra High Speed Pulse Generator
- AVMP-2A Ultra High Speed Pulse Generator
- AVMP-3 Ultra High Speed Pulse Generator
- AVMP-4 Ultra High Speed Pulse Generator
Related Applications Information
- AN-2A ~ General Applications Information
- TB6 ~ What Coaxial Cable Should I Use?
- How Can I Extend the Amplitude Range to Low Levels?
- AN-5 ~ Vendors of Fast Pulse Accessories
- How to Deliver a Fast 2 Amp Pulse to a Diode in a Probing Station
- What Effect Does Impedance Mismatching Have on High-Speed Pulse Generators?
- LabView drivers
Some or all of the models in the AVMP-3A product family have rise times of ≤500ps and amplitudes of ≥6V - these items are subject to export controls (US ECCN 3A230 / 3A44B, Canada Export Control List 4507.3)
This item can be readily shipped to end-users in Argentina, Australia, Austria, Belgium, Bulgaria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, the Netherlands, New Zealand, Norway, Poland, Portugal, the Republic of Korea, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom and the United States.
Exports to other countries requires a specific export permit from the Export Controls Division of Foreign Affairs, Trade, and Development Canada (DFATD). Unfortunately, Avtech is experiencing prolonged delays from DFATD, and we can not currently obtain the required export permits in a timely fashion.